How To Do DIY Basement Framing
Basement framing is one of the techniques in the completion of basement construction. Well, if you really want to expand your space at home, you probably do have to make your basement into a room that is useful, such as for work room, break room where you could not be bothered by anyone, children’s games room or perhaps for many other uses. But, before you realize that you need to finish your basement construction first so that later you do not experience further problems, usually on the water and damp problems. Well, here I will explain how to frame your basement with the advice of the experts.
Basement framing is a little difficult and you may need help from your friends or your family. First, of course you have to prepare a layout plan. Check all measurements in your basement and plan for measures plates top and bottom plates, which are after this will be made. Once you find the right measures, prepare hammer drill to drill holes in the wood that is used as a bottom plate, and do according to the measurement that you specify for all the remaining bottom plates. After that, attach the top plates in accordance with the bottom plates, make sure all top plates are adjusted with all the bottom plates.
After the bottom plates and top plates are installed, the next thing you should do is install the studs. But, before that, in order to create neat and fit work, then make sure each interval of measurement of the studs and mark with the chalk or markers. Install the stud and nail the studs in order to stick it strongly, and finish all the studs until it locks everything. After all is completed, install the new frame and blocking that you desire to keep your basement from the abnormal moisture and other problems. Basement framing might be difficult and complicated to do, but if you do it patiently, then surely you will get a certain self satisfaction.